Министерство образования Республики Башкортостан
ГАПОУ Уфимский топливно-энергетический колледж
МЕТОДИЧЕСКОЕ ПОСОБИЕ
«SAFETY FIRST»
по дисциплине: «Иностранный язык»
Уфа
2016.
Аннотация
Основная цель данного методического пособия – подготовка студентов к работе на производстве, которая начинается с соблюдения правил техники безопасности. Пособие подготовлено в соответствии с требованиями Федерального государственного образовательного стандарта и примерной программы по дисциплине «Иностранный язык»
В пособии использованы оригинальные англоязычные тексты, частично сокращенные и адаптированные. Для закрепления материала представлен ряд упражнений, которые помогут в кратчайшие сроки расширить и закрепить лексику , необходимую при сдаче любого экзамена по технике безопасности как на английском так и на русском языках.
Содержание
Введение…………..………………………………………………… 4
2. Категории знаков техники безопасности………………………….. 5
3. Обозначения знаков техники безопасности……………………… 10
4. Лексические упражнения ………………………………………… 12
5. Тексты для дополнительного чтения………………………………. 20
Заключение ………………………………………………………… 25
Список использованных источников………………………………. 26
Safety first
The main causes of accidents in the workplace are not dramatic fires and explosions, but very ordinary accidents that can be easily prevented by workers looking out for their own safety and the safety of others. Many of these accidents are minor, but some cause death or serious injury. The most common cause of accidents is from slips , trips and falls, followed by lifting and carrying. Accidents involving cuts, burns, dropped objects, falling from height, and collisions are also common but often avoidable.
The main preventable measure is safety training. All employees in the oil and gas industry go through regular safety training courses to encourage a strong safety culture. For hazardous areas , employees will be issued with personal protective equipment (PPE) which must be worn in signed areas. Safety boots , hard hats, overalls, gloves, and safety glasses are usually a standard issue. In addition, ear protectors and special trades’ equipment such as welding shields, goggles, and gloves will be issued.
Safety signage has to be followed. Signs are classified with different shapes and colours to denote whether they are mandatory , warnings, or giving information. Most signs are independent of language and use standard symbols as ideograms. The meaning of some of these signs is not always immediately obvious and so they should be learnt. Following information signs is practiced in fire drills where workers must follow signs to safe areas. Those working offshore will attend special courses on helicopter escape, use of life jackets and survival craft, and escape through smoke. There are often opportunities for workers to volunteer as fire officers or firest aiders, and special training is given.
Categories of safety signs
Safety signs are divided into categories according to the type of message they are intended to convey. Each category is assigned a specific format and set of colours.
Prohibition Signs
[pic]
These signs should be used to convey “Do Not” type commands .For example, to indicate that smoking is not allowed or that, where a particular material reacts dangerously with water or water should not be used to extinguish a fire. In the workplace they should be used to reinforce instructions prohibiting dangerous activities. Such instructions, however, should also form part of the employees training. Signs prohibiting an activity consist of a circular red band and single diagonal cross bar descending from left to right at an angle of 45 degrees. The background should be white with the pictogram indicating the nature of the command in black.
Warning Signs
[pic]
These signs should be used to make people aware of a nearby danger. For example, a flammable liquid store or a laboratory where radioactive substances are in use should have an appropriate warning sign near the entrance. These signs are required by the Health and Safety (Safety Signs and Signals) Regulations and in specific cases by the Dangerous Substances (Notification and Marking of Sites) Regulations .Signs warning of a particular hazard consist of a black band in the shape of an equilateral triangle. The background within the band should be yellow with the pictogram indicating the type of hazard in black positioned centrally on the sign.
Mandatory Signs
[pic]
These signs should he used to indicate actions that must be carried out in order to comply with statutory requirements. For example , self-closing fire doors that must be kept closed to comply with the fire risk assessment should be labeled with “FIRE DOOR KEEP SHUT” signs. An area of a construction site where hard hats should be worn should also have appropriate signs at the entry points. It should he noted that the Health and Safety (Safety Signs and Signals) Regulations do not apply to mandatory fire instructions, but apply to health and safety mandatory signs where pictograms are required. The minimum regulatory requirement is for the sign to include an appropriate pictogram. There are no pictograms for fire safety instruction signs and although mandatory in the UK through inclusion in the requirements of workplace fire assessments, such signs are not considered as health and safety signs within these Regulations. Thus the familiar white on blue fire safety mandatory signs using text only will remain in place and will not have to be changed.
Fire instruction notices, which list actions that occupants must carry out in the event of a fire are, by convention, written as white text on a blue background but not in the circular format. The colours are used to convey the mandatory nature of the instructions but because of the amount of text normally needed a rectangular format is used. The general mandatory sign of a white exclamation mark on a blue circle may be used in conjunction with a fire instructions notice.
Signs indicating mandatory requirements consist of a blue circle with the pictogram or text in white positioned centrally.
Safe Condition Signs
[pic]
These signs should he used to indicate escape routes, emergency exits, first aid equipment, emergency showers and the others. Safe condition signs consist of a green rectangle or square with the pictogram or text in white positioned centrally. In the same way as for mandatory signs some UK fire safety signs in this category are not required by the Health and Safety (Safety Signs and Signals) Regulations For example “PUSH BAR TO OPEN” is not required to comply and there is no pictogram with that meaning. Such signs are still needed for compliance with other UK legislation.
Exit Signs
In order to comply with the requirements of the Building Regulations, every doorway or other exit providing access to a means of escape, other than exits in ordinary use, should be provided with an exit sign. Installation of signs conforming to British Standard will satisfy both the Building Regulations and the Health and Safety (Safety Signs and Signals Regulations). In general these Regulations will not require any changes where existing fire safety signs containing symbols comply Fire safety signs, notices and graphic symbols.
Provision of exit signs
The regulations place a duty on employers to ensure that safety signs are provided in circumstances where the risk to the health and safety of employees, identified through the risk assessment requirement contained with the Management of Health and Safety at Work Regulations cannot be entirely, engineered or managed out of the workplace. It should be noted that the Regulations do not require safety signs to be used where there are no significant risks to the health and safety of employees. The issue which then requires to be resolved is whether it is necessary to indicate exits with signs. In arriving at a decision the fundamental issue which will underpin the process is whether the risk of injury or death to employees from a fire within a particular premises is deemed to be significant enough to warrant the provision of signs indicating fire exit routes and final exits. If it is deemed that the risk is not significant then there is no need to install the signs. Thus, for example, a small, single storey premises with one clearly visible exit should not require a fire exit sign because it would be obvious to staff that the door is their only means of access and hence there should not be a significant risk to their health and safety from fire by not signing the door as an exit. However, those buildings with more complex internal layouts incorporating multiple exits, some of which may not be readily visible nor frequently used, or where large numbers of the public congregate, will require fire exit signs. They should be complete with directional arrows, if there is a significant risk of individuals not being able to find their way to a place of safety in the event of a fire.
Supplementary information signs
These are signs used to provide additional information. In the Health and Safety (Safety Signs and Signals) Regulations these are confined to directional arrows. However , they include various text messages as well as arrows under the description of supplementary signs. To comply with the Regulations where a direction indication is needed the minimum requirement is for a supplementary sign in the form of an arrow. The supplementary text messages in the British Standard such as “Water as an extinguishing agent prohibited” will be acceptable under the regulations only if accompanied by an appropriate pictogram. This is entirely consistent with the philosophy of the British Standard. Supplementary signs consist of a square or rectangle in the appropriate colour with the pictogram or text in white and positioned centrally. The colour should be green where the information supplements a safe condition sign, red where It supplements a fire equipment sign or yellow to supplement a warning sign.
There is a minor conflict between the British Standard and the regulations on the permitted colour of supplementary signs. They allow text to be in black on a white background or white on the appropriate colour. The colour alternative is the only option permitted in the Regulations. Thus the Regulations can be complied with by adhering to this option in the Standard.
Fire Fighting Equipment Signs
[pic]
These signs are used to mark the location of fire fighting equipment and fire alarm activation points. However, where possible, fire equipment should be positioned where it is clearly visible. Red to be used as the identifying colour for fire fighting equipment. If the equipment itself is red this will satisfy the requirement. Where it is not red then highlighting the position of fire fighting equipment by colouring background behind the equipment red may be enough to comply.
Fire equipment signs consist of a red rectangle or square with the pictogram in white positioned centrally on the sign.
Summary of Safety Signs
The pictograms are as shown in the regulations and the completed sign must be in accordance with the appropriate colour’s.
Type Shape
Colour
Pictograms
PROHIBITION SIGNS
These signs prohibit actions detrimental to safety No Smoking
Circular
RED with a white background red band and crossbar.
[pic]
WARNING SIGNS
These signs give warning of potential risks Triangular
Triangular
YELLOW with black symbol or text
[pic]
MANDATORY SIGNS
Signs that require actions or activities that will contribute towards safety
Circular
BLUE with symbol or text in white
[pic]
SAFE CONDITION SIGNS
These signs indicate exit routes in the event of a fire or emergency
Rectangular
GREEN with white symbol or text
[pic]
FIRE EQUIPMENT SIGNS
These signs are used to indicate the location of fire equipment
Rectangular or Circle
Red with white symbols or text
[pic]
Supplementary Information Signs
Rectangular
Green, Red, Yellow, with White or Black Text
[pic]
Lexical Exercises:
Point to these parts of your body. Say and learn.
Ears eyes face feet fingers
Hands head
Look at the personal protection equipment (PPE)/ Complete the sentences below
Ear protectors Hard hat Face guard
[pic] [pic] [pic]
Boots Goggles Gloves
[pic] [pic] [pic]
Safety harness respirator
[pic] [pic]
1. A hard hat protects your________
2 A face guard protects your__________
3 Boots protect your _______________
4__________protect your ears from noise
5__________ protect your hands
6__________protect your eyes
A _______ protects you from smoke and dangerous fumes
A _______ protects you from a fall
Safety signs: colours and shapes
Safety signs are very important because the oil and gas industry has many hazards. Hazards are possible dangers like electricity, chemicals, hot things, gas, machines, noise, falling objects, and slippery surfaces. There are four main kinds of safety signs:
These signs warn us about hazards.
These signs tell us “You must wear or do the thing in the picture”
These signs usually have a red band across them. They tell us we must not do things.
These signs give information about safety.
Match the signs with the descriptions given below.
[pic] [pic] [pic] [pic] [pic] [pic]
[pic] [pic] [pic]
[pic] [pic] [pic]
[pic] [pic] [pic]
- Wear goggles
- Don’t smoke here
- This way to the emergency exit
- Wear ear protectors
- Don’t eat here
- Danger! High voltage!
- Fire exit
- Wear boots
- Wear respirator
- Do not enter
- Danger!Radiation
- Danger! Overhead crane!
- This way to the pharmacy
- Do not touch!
- Drinking water is here
Read the health and safety officer talking to a team of welders and pipe-fitters
H - health and safety officer
P1- pipe-fitter1
P2- pipe-fitter2
P3- pipe-fitter3
H There are six main hazards for welders. Can you name them?
P1 Electric shock
H Right. So what do we do?
P2 Weld dry. Don’t stand in water.
P3 And wear leather shoes and always wear gloves.
H Right . we also check our equipment often. We switch off equipment when we are not using it. Another hazard?
P3 Gas cylinders. Gas cylinders can explode.
H Correct . So how do we stay safe?
P1 Don’t drop them!
H Right. How?
P2 Always secure the cylinders. And always move them safely.
H . Ok. And three steps before moving?
P2 Close the valve, remove the regulator , and replace the valve cap. Then use a cart to move a cylinder.
H Right. And always close the valve when you go on break or at the end of the day. Also , you should always wear your safety glasses when you’re working. OK, that’s two hazards. What else?
P3 Arc rays They burn eyes and skin
H Precautions?
P1 Cover skin and eyes. Never look at the spark. Always use a welder’s helmet and gloves.
H . Those things also protect us from arc sparks. Hot sparks can burn clothes and start fires. So wear your protective clothes. Cotton trousers are good. And no pockets! Pockets catch sparks. Another hazard?
P2 Smoke. Smoke from welding can be dangerous .
P1 So we use respirators. And we always know the material we’re welding.
H That’s right . And indoors, we always use the ventilation system. OK, there’s one more hazard on my list . Trips and falls You work in confined spaces, sometimes underground, sometimes high u. So what do you do?
P3 Always think about where you are. Wear a safety harness.
P2 Keep the work area clean and tidy.
H Right
6 . Number the welding hazards in the order you hear them
Gas cylinders d) smoke
Arc sparks e) electric shock
Arc rays f) trips and falls
7. Match each hazard (a-f) in 6 above with a precaution
Weld dry.
Always move it safely.
Cover up skin and eyes.
No pockets!
Know the material we’re welding .
Keep the work area clean and tidy.
8.Read again. Tick the pieces of safety equipment you hear.
Safety glasses 7. Respirator
Welder’s helmet 8. Boots
Face guard 9. Ventilation system
Gloves 10. Ear protectors
Cotton trousers 11. Safety harness
Welding jacket 12. Leather shoes
9. What safety precautions do you take when you drive a car, or ride a motorcycle or bicycle?
10. Choose the correct words to complete each sentence.
We switch off equipment/an equipment
There are six main hazard/ hazards for welders
Gas cylinder / cylinders can explode.
Never look at spark/ the spark.
Hot sparks can burn clothes / a clothes and start fires.
Smoke/ A smoke from welding can be dangerous.
Use cart / a cart.
We always know material/ the material we’re welding.
Cover skin/ a skin and eyes.
Don’t stand in water / a water.
11.The pictures are from a safety manual for drilling crews. Which person is
1 wearing loose clothes?
2 standing under a load?
3. running up or down steps?
4. eating near chemicals?
5 handling chemicals without PPE?
6 walking below people working?
7 standing between a wall and a moving load?
using a broken tool?
climbing without a safety harness?
doing the right thing : lifting correctly and keeping his back straight?
[pic]
12. Say what might happen in each situation?
Example:
Machines might catch his loose clothes and injure him.
13.Work in pairs. You work in a drilling crew. You are looking after a new person in the crew. Take turns advising him.
Example
You shouldn’t wear loose clothes because machines might catch them.
Texts for supplementary reading
All workers are entitled to work in environments where risks to their health and safety are properly controlled. Under health and safety law, the primary responsibility for this is down to employers.
Worker s have a duty to take care of their own health and safety and that of others who may be affected by your actions at work. Workers must co-operate with employers and co-workers to help everyone meet their legal requirements .
As a worker, if you have specific queries or concerns relating to health and safety in your workplace, talk to your employer, manager or supervisor or a health and safety representative. For more details on employers and your own responsibilities in law you can read [link]
http://www.hsa.ie/eng/Topics/Hazards/
